Vol. 19 No. 4 (2022) | Nigerian Journal of Technological Development

Published: 2023-01-28

Effects of Geometric Ratios on Heat Transfer in Heated Cylinders: Modelling and Simulation

O. A. Olayemi, A. M. Obalalu, S. E. Ibitoye, A. Salaudeen, M. O. Ibiwoye, B. E. Anyaegbuna, I. K. Adegun

287-297

DOI:

10.4314/njtd.v19i4.1

download PDF

Effects of Annular-finned Tube Deformation on Thermal Stresses in a Heat Exchanger

M. Kashani, A. Hatami, M. Hosseini

298-308

DOI:

10.4314/njtd.v19i4.2

download PDF

Comparison of Errors Caused by Flux Limiters on the Numerical Solution of Advection-Diffusion Problem

Adek Tasri

309-315

DOI:

10.4314/njtd.v19i4.3

download PDF

Optimization of Cutting Parameters using the RSMDesirability Approach in the MQL-Assisted Turning of AISI 4130

N. C. Ghuge, D. D. Palande, P. B. Belkhode

316-323

DOI:

10.4314/njtd.v19i4.4

download PDF

Short-term Study of the Influence of Aggregate Size on the Fire Resistance of Concrete

F. O. Ayodele, O. R. Olulope, I. S. Ayeni

324-331

DOI:

10.4314/njtd.v19i4.5

download PDF

Techno-economic Evaluation of Biodiesel Production from Edible Oil Waste via Supercritical Methyl Acetate Transesterification

A. B. D. Nandiyanto, E. S. Soegoto, S. A. Maulana, A. W. F. Setiawan, F. S. Almay, M. R. Hadinata, R. Ragadhita, S. Luckyardi

332-341

DOI:

10.4314/njtd.v19i4.6

download PDF

Assessing Social Sustainability Performance in Textile Industry using Integrated Fuzzy Best-Worst Method and Fuzzy Inference System

T. G. Fadara, K. Y. Wong

342-353

DOI:

10.4314/njtd.v19i4.7

download PDF

Buffer-aided Relay Selection Technique in a Cooperative Communication Network

S. B. Ajibowu, O. A. Adeleke, I. A. Ojerinde

354-360

DOI:

10.4314/njtd.v19i4.8

download PDF

Numerical Forced Convection Heat Transfer, Fluid Flow and Entropy Generation Analyses of Al₂O₃- Water Nanofluid in Elliptical Channels

O. T. Olakoyejo, A. O. Adelaja, S. M. Abolarin, O. O. Adewumi, M. O. Oyekeye, A. A. Oluwo, O. Oluwatusin, A. Mweigye

361-372

DOI:

10.4314/njtd.v19i4.9

download PDF

Selection of Wireless Communication Technologies for Embedded Devices using Multi-criteria Approach and Expert Opinion

J. A. Adebisi, O. M. Babatunde

373-381

DOI:

10.4314/njtd.v19i4.10

download PDF

Morphology and Physico-Mechanical Properties of Resin-bonded Palm Kernel Shell and Coconut Shell Grain-based Sandpaper Composites

H. A. Ajimotokan, A. A. Samuel, T. K. Ajiboye, T. S. Ogedengbe, I. O. Alabi

382-390

DOI:

10.4314/njtd.v19i4.11

download PDF

Nonlinear Time History Analysis for Seismic Effects on Reinforced Concrete Building

A. Hasan, K. I. M. Iqbal, S. Ahammed, A. Ghosh

391-399

DOI:

10.4314/njtd.v19i4.12

download PDF

Load Voltage Control of a Wind Turbine-driven Three-phase Squirrel-Cage Induction Generator in an Islanded Microgrid

S. A. Kamilu, L. Olatomiwa, O. M. Longe, S. Ikuforiji

400-408

DOI:

10.4314/njtd.v19i4.13

download PDF

Valorization of Sugarcane Bagasse for Hydrogen-Rich Gas Production using Thermodynamic Modeling Approach

S. I. Mustapha, I. A. Mohammed, F. A. Aderibigbe, T. L. Adewoye, F. O. Omoarukhe, A. O. Sowole

409-416

DOI:

10.4314/njtd.v19i4.14

download PDF

Effect of Thermal Screen Position on Greenhouse Microclimate and Impact on Crop Growth and Yield

E. Zakir, Q. O. Ogunlowo, T. D. Akpenpuun, W-H. Na, M. A. Adesanya, A. Rabiu, O. S. Adedeji, H. T. Kim, H-W. Lee

417-432

DOI:

10.4314/njtd.v19i4.15

download PDF

Nigerian Journal of Technological Development
Journal / Nigerian Journal of Technological Development / Vol. 19 No. 4 (2022) / Articles

Articles

Effects of Geometric Ratios on Heat Transfer in Heated Cylinders: Modelling and Simulation

DOI:

Effects of Annular-finned Tube Deformation on Thermal Stresses in a Heat Exchanger

DOI:

Comparison of Errors Caused by Flux Limiters on the Numerical Solution of Advection-Diffusion Problem

DOI:

Optimization of Cutting Parameters using the RSMDesirability Approach in the MQL-Assisted Turning of AISI 4130

DOI:

Short-term Study of the Influence of Aggregate Size on the Fire Resistance of Concrete

DOI:

Techno-economic Evaluation of Biodiesel Production from Edible Oil Waste via Supercritical Methyl Acetate Transesterification

DOI:

Assessing Social Sustainability Performance in Textile Industry using Integrated Fuzzy Best-Worst Method and Fuzzy Inference System

DOI:

Buffer-aided Relay Selection Technique in a Cooperative Communication Network

DOI:

Numerical Forced Convection Heat Transfer, Fluid Flow and Entropy Generation Analyses of Al₂O₃- Water Nanofluid in Elliptical Channels

DOI:

Selection of Wireless Communication Technologies for Embedded Devices using Multi-criteria Approach and Expert Opinion

DOI:

Morphology and Physico-Mechanical Properties of Resin-bonded Palm Kernel Shell and Coconut Shell Grain-based Sandpaper Composites

DOI:

Nonlinear Time History Analysis for Seismic Effects on Reinforced Concrete Building

DOI:

Load Voltage Control of a Wind Turbine-driven Three-phase Squirrel-Cage Induction Generator in an Islanded Microgrid

DOI:

Valorization of Sugarcane Bagasse for Hydrogen-Rich Gas Production using Thermodynamic Modeling Approach

DOI:

Effect of Thermal Screen Position on Greenhouse Microclimate and Impact on Crop Growth and Yield

DOI:

Journal Identifiers