Article Sidebar
Published:
Oct 27, 2021DOI:
10.4314/njt.v40i4.19Keywords:
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
Power loss minimization load flow studies using Artificial Bee Colony swarm intelligence technique
Abstract
This paper presents the capability of an emerging swarm intelligence technique for power loss minimization known as the Artificial Bee Colony (ABC) used in the context of an Alternative Load Flow Analysis (LFA) technique (ABC-LFA) for the solution of a power systems network. Studies are performed considering the effect of an important parameter of the ABC, the “maxcycle” on the LFA process; experiments are conducted by applying the ABC-LFA to the Western System Coordinated Council (WSCC) 3-machine 9- bus power system and a section of the Nigerian 132-kV power transmission network Port-Harcourt Region (NPHC-132), and the results reported. The results indicate that increasing the value of the ABC “maxcycle” parameter has a pronounced effect on the results obtained by the ABC-LFA. The results also indicate the sensitivity of the ABC to low values of maxcycle parameter.
