Article Sidebar
Published:
Oct 22, 2021DOI:
10.4314/njt.v40i4.1Keywords:
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
Evaluation of the causes of flexible pavement failure; case study of Enugu/Port-Harcourt expressway
Abstract
This study examined the causes of flexible pavement failure, taking the Enugu/Port-Harcourt expressway as a case study; to understand possible peculiarities. Chainages 101+400 and 125+925 were the most critical, having potholes of 500mm in depth; hence, soil samples were taken from these spots. The following tests were conducted: Particle size distribution, Atterberg limits, Permeability, Compaction, and California Bearing Ratio (CBR). The results obtained showed evidence of presence of clay in the subgrade; hence, concluding that the failure was mainly caused by poor soil material. From visual condition survey, it was noted that there were no drainages even at the critical paths of the alignment, and there was a significant proportion of Heavy Goods Vehicles (HGVs) which may not have been adequately considered during design.
