Article Sidebar
Published:
Mar 23, 2021DOI:
10.4314/njt.v40i1.18Keywords:
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
Effective Moisture Diffusivity and Activation Energy of Tannia Cormels: Influence of Temperature, Pre-Treatment and Slice Thickness
Abstract
This study investigated the effects of temperature, pre-treatment and slice thickness on the effective moisture diffusivity and activation energy of tannia (Xanthosoma sagittifolium) cormels. White-fleshed and pink-fleshed varieties of the cormels were used for this study. The effective moisture diffusivity and activation energy of fresh and blanched cormels were determined by drying them at three temperature levels (60, 70 and 80°C) and three slice thicknesses (2, 3 and 4 mm). The effective moisture diffusivity and activation energy of the cormels ranged between 1.47×10−7 and 2.09×10−6 m2s−1 and 49.02 and 63.23 kJmol−1 respectively. The study established that the effective moisture diffusivity and activation energy are drying temperature dependent. The effects of pre-treatment and slice thickness were also found to be significant on the measured parameters. Drying of blanched thin slices of tannia cormels at relatively high temperature levels is recommended for faster and cost-effective drying of the cormels.
