Article Sidebar
Published:
Sep 16, 2020DOI:
10.4314/njt.v39i3.30Keywords:
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
Optimizing the control and automation of variable torque on 3-phase induction motor using programable neuro logic controller and variable frequency drive
Abstract
This paper presents optimizing the control and automation of variable torque on 3-phase induction motor using programmable neuro logic controller (PNLC) and variable frequency drive (VFD). The system was designed by developing a transfer model of the nonlinear input current from the load cells and feed to an improved PLC model for an approximate current function which is identified by the VFD with respect to the controlled load torque to power the 4.07KW rated 3-phase induction motor. The models were implemented using control system toolbox, neural network toolbox and simulated with Simulink in MATLAB. From the simulation of the improved controller model, the step response time performance of the PLC was improved from 2.25s to 1.22s with the PNLC.The simulation result of the VFD controlled 3-PIM motor shows that 37.07% of energy (power) was conserved compared to a characterized system with 20% energy conservation rate.
Keywords: 4.07KW 3-phase induction motor, PLC, ANN, VFD, Energy conservation rate
