Article Sidebar
Published:
Jun 30, 2017Keywords:
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
PREDICTION OF FLEXURAL STRENGTH OF CHIKOKO POZZOLANA BLENDED CEMENT CONCRETE USING OSADEBE’S REGRESSION FUNCTION
Abstract
Chikoko mud is abundant in the mangrove swamps of the Niger Delta area of Nigeria. Its utilization in concrete production is traceable to its pozzolanic properties. In this paper, a regression model is developed to predict and optimize the flexural strength of chikoko pozzolana blended cement concrete using Osadebe’s regression function. The results obtained from the derived regression model are very close to those obtained from experiment. The model was tested for adequacy using a Fisher test at 5% level of significance and was found to be adequate. A computer program coded in basic language was used to select the mix ratios that would optimize the flexural strength of chikoko pozzolana blended cement concrete. The computer program is user-friendly and can be used to select the mix ratios corresponding to a desired strength value with reasonable accuracy and without waste of time.
Â
