Article Sidebar
Article Details
Copyright belongs to the Faculty of Engineering, University of Nigeria, Nsukka, Nigeria
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from https://www.nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in Statement of Originality.pdf (nijotech.com)
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
Main Article Content
Physical Properties of Soybean (A Research Report Communication)
Abstract
Physical properties of linear dimensions, sphericity and solid density of four different varieties of dry mature soybean were determined in this study. For the varieties - TGX1768-6F, TGX-1681-3F, TGX-536-02D, and TGX-1740-3F, the mean sphericity are 0.745, 0.857, 0.830, and 0.829 respectively. It is shown from the statistical analysis that there is significant difference between the sphericity of TGX-1768-6F and the other three varieties at a probability level of 0.05. The solid densities of all the varieties are very close and range from 1079.5 to 1170kg/m3.
