Vol. 2 No. 11 (2010) | International Journal of Engineering, Science and Technology

Published: 2011-03-17

Unsteady MHD convective flow within a parallel plate rotating channel with thermal source/sink in a porous medium under slip boundary conditions

GS Seth, R Nandkeolyar, S Ansari

DOI:

10.4314/ijest.v2i11.64550

download PDF

Constraint based frequent pattern mining for generalized query templates from web log

RV Pujeri, GM Karthik

DOI:

10.4314/ijest.v2i11.64551

download PDF

A novel progressively swarmed mixed integer genetic algorithm for security constrained optimal power flow (SCOPF)

MM Bhaskar, S Muthyala, M Sydulu

DOI:

10.4314/ijest.v2i11.64552

download PDF

Influence of process parameters on the cup drawing of aluminium 7075 sheet

G Venkateswarlu, MJ Davidson, GRN Tagore

DOI:

10.4314/ijest.v2i11.64553

download PDF

Development of light weight ALFA composites

JB Rao, DV Rao, NRMR Bhargava

DOI:

10.4314/ijest.v2i11.64554

download PDF

An analytical study of critical heat flux in natural convective boiling in a vertical tube

HMM Afroz, MA Islam

DOI:

10.4314/ijest.v2i11.64555

download PDF

Multi-level sequential circuit partitioning for test vector generation for low power test in VLSI

VH Prathyush, K Somasundaram

DOI:

10.4314/ijest.v2i11.64556

download PDF

Implementation of an online scheduling support system in a high mix manufacturing firm

LSR Krishna, V Mahesh, S Dulluri, CSP Rao

DOI:

10.4314/ijest.v2i11.64557

download Untitled

Anisotropy abrasive wear behavior of bagasse fiber reinforced polymer composite

P Mishra, SK Acharya

DOI:

10.4314/ijest.v2i11.64558

download PDF

Mixed-mode (I/II) crack initiation direction for elastic-plastic materials based on crack-tip plastic zone

CM Sharanaprabhu, SK Kudari

DOI:

10.4314/ijest.v2i11.64559

download PDF

A cash flow oriented EOQ model under permissible delay in payments

RP Tripathi, SS Misra, HS Shukla

DOI:

10.4314/ijest.v2i11.64560

download PDF

Non-axisymmetric dynamic response of imperfectly bonded buried liquidfilled orthotropic thin cylindrical shell due to incident shear wave (SH wave)

RS Rajput, S Kumar, A Chaube, JP Dwivedi

DOI:

10.4314/ijest.v2i11.64561

download PDF

Thermal analysis of externally pressurised step bearing including centrifugal inertia effect for a bubbly lubricant

SS Gautam, S Quamar, MK Ghosh

DOI:

10.4314/ijest.v2i11.64562

download PDF

International Journal of Engineering, Science and Technology
Journal / International Journal of Engineering, Science and Technology / Vol. 2 No. 11 (2010) / Articles

Articles

Unsteady MHD convective flow within a parallel plate rotating channel with thermal source/sink in a porous medium under slip boundary conditions

DOI:

Constraint based frequent pattern mining for generalized query templates from web log

DOI:

A novel progressively swarmed mixed integer genetic algorithm for security constrained optimal power flow (SCOPF)

DOI:

Influence of process parameters on the cup drawing of aluminium 7075 sheet

DOI:

Development of light weight ALFA composites

DOI:

An analytical study of critical heat flux in natural convective boiling in a vertical tube

DOI:

Multi-level sequential circuit partitioning for test vector generation for low power test in VLSI

DOI:

Implementation of an online scheduling support system in a high mix manufacturing firm

DOI:

Anisotropy abrasive wear behavior of bagasse fiber reinforced polymer composite

DOI:

Mixed-mode (I/II) crack initiation direction for elastic-plastic materials based on crack-tip plastic zone

DOI:

A cash flow oriented EOQ model under permissible delay in payments

DOI:

Non-axisymmetric dynamic response of imperfectly bonded buried liquidfilled orthotropic thin cylindrical shell due to incident shear wave (SH wave)

DOI:

Thermal analysis of externally pressurised step bearing including centrifugal inertia effect for a bubbly lubricant

DOI:

Journal Identifiers