Article Sidebar
Published:
Jul 27, 2007Keywords:
Article Details
Submission of a manuscript to this journal is a representation that the manuscript has not been published previously and is not under consideration for publication elsewhere.
All authors named in each manuscript would be required to sign a form (to be supplied by the Editor) so that they may retain their copyright in the article but to assign to us (the Publishers) and its licensees in perpetuity, in all forms, formats and media (whether known or created in the future) to (i) publish, reproduce, distribute, display and store the contribution, (ii) translate the contribution into other languages, create adaptations, reprints, include within collections and create summaries, extracts and/or abstracts of the contribution, (iii) create any other derivative works(s) based on the contribution, (iv) to exploit all subsidiary rights in the contribution, (v) the inclusion of electronic links from the contribution to third party material where-ever it may be located, and (vi) license any thrid party to do any or all of the above.
Main Article Content
Relationship Between Slugging Pressure and Brittle Fracture Tendency – A Case Study for Aspirin Tablets
Abstract
Objective – Slugging is a pre-compression technique for the dry granulation of hydrolysable drugs (e.g. aspirin). The study was carried out to relate the slugging load to the hardness of the granules and the brittle fracture tendency of the final (recompressed) tablets.
Method – Varying compression load were applied to aspirin powder to form slugs, which were subsequently broken down to form granules. These were recompressed to give the final tablets. The hardness of the slugs was determined and taken as measure of the hardness of the resulting granules. The following tableting parameters were measured for the final tablets - tensile strength (T), packing fraction (Pf) and the brittle fracture index (BFI).
Results - A high slugging load was associated with the formation of hard slugs and hence hard granules. Upon recompression the hardest granules formed the hardest tablets (T = 3.29MN m-2) while the softest granules formed the softest tablets (T=1.09MN m-2). In turn, the hardest tablets displayed the highest brittle fracture tendency (BFI = 0.59) compared with the softest tablets (BFI= 0.21). A positive linear correlation existed between tablet hardness (T) and BFI values (r = 0.98).
Keywords: Slugging pressure, aspirin granules, tablet tensile strength, brittle fracture index
> Tropical Journal of Pharmaceutical Research Vol. 4 (2) 2005: pp. 483-487
