Article Sidebar
Published:
Dec 31, 2013Keywords:
Article Details
Tanzania Journal of Engineering and Technology (Tanz. J. Engrg. Technol.) publications are written as a basis for academic discussions. Whereas effort is made by the Editorial Board to screen out inaccurate or misleading statements, data or opinions, Tanz. J. Engrg. Technol. wishes to make it clear that the contents of the articles are the sole responsibility of the authors. Accordingly, the Editorial Board and editors, publisher, College of Engineering and Technology and the University of Dar es Salaam accept no responsibility or liability whatsoever for the opinions, inaccurate or misleading data or statement and views expressed by the authors.
However, the College of Engineering and Technology, the publisher of the Journal, reserve all rights of the articles published in the Journal. Whereas the contents of the articles are available electronically without cost, no part of the publication may be transmitted in any form or reproduced electronically or mechanically, except for short extract in critical scholarly review, research or discourse with an acknowledgement.
Main Article Content
Effect of Temperature and Slice Size on Avocado Pulp Drying Rate and Oil Yield
Abstract
The effect of temperature and slice thickness on avocado pulp drying rate and oil yield was determined at 50 o C, 60 o C and 70 o C. Pulp slices of 2mm and 5 mm thick were used. The avocado pulp was found to contain 74-75% (wet basis) water, which makes extraction of oil by both chemical and mechanical means difficult. Experimental results showed that oil yield increased with decreasing moisture content reaching a yield of 61% at 10% moisture content. The rate of drying increased with temperature, but decreased with slice thickness. The drying data obtained agreed well with several thin-layer drying models. The models showed that the characteristic drying constant increased linearly with drying temperature and decreased with slice thickness. The Physico-chemical properties of the obtained oil compared favorably with those obtained from other conventional seed oils.
