Article Sidebar
Article Details
Authors who submit papers to this journal agree to the following terms:
a) Authors retain copyright over their work, while allowing the journal to place this work on the journal website under a Creative Commons Attribution License, which allows others to freely access, use, and share the work, with an acknowledgment of the work's authorship and its initial publication in this journal.
b) Authors are able to waive the terms of the CC license and enter into separate, additional contractual arrangements for the non-exclusive distribution and subsequent publication of this work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
c) In addition, authors are encouraged to post and share their work online (e.g., in institutional repositories or on their website) at any point after publication on the journal website.
Main Article Content
A spatiotemporal analysis of the effect of ambient temperatures on the thermal behaviour of the Lunar Laser Ranging optical telescope at Hartebeesthoek Radio Astronomy Observatory
Abstract
Development of the 1-meter aperture Lunar Laser Ranging (LLR) telescope is underway at the Hartebeesthoek Radio Astronomy Observatory (HartRAO) which is expected to achieve sub-centimeter range precision and accuracy to the Moon, for enhanced tests of Earth-Moon system dynamics. Key to the operational performance of the telescope is thermal analysis of the telescope composite structure including the optical mirrors. This study presents a thermal analysis on the integrated component materials comprising the LLR telescope in ANSYS, with the aim of simulating its thermal behaviour in response to site-based ambient air temperature (TA). Results show that for a full day TA profile spanning the time period 00:00 to 23:59 the resulting range of simulated thermal variations measured at 12:00 midday and 23:59 nighttime across the telescope composite structure was found to be 9.11 ºC to 10.03 ºC and 9.12 ºC to 9.86 ºC respectively. In particular, the spider assembly and outer tube surface had the largest range of thermal variations i.e. greater than absolute 1 ºC and thus, could be the main areas on the telescope where most thermal variations would occur. Furthermore, validation of the outer tube thermal variations using the 64 Resistant Temperature Detector (RTD) sensors mounted onto the test tube, showed relatable overall thermal variations of about 2 ºC, at wind speeds of 0 to 0.4 km/h. In overall, these findings provide a typical expectation of the LLR telescope thermal behavior in response to TA at the site; and thus could be used as a guide to develop an RTD-based thermal monitoring system for the HartRAO LLR optical telescope.
