Article Sidebar
Published:
Feb 25, 2019Keywords:
Article Details
Copyright for articles published in this journal is retained by the journal.
SAJChem applies the Creative Commons Attribution (CC BY) license to manuscripts we publish. This license was developed to facilitate open access – namely, free immediate access to, and unrestricted reuse of, original works of all types. Under this license, authors agree to make articles legally available for reuse, without permission or fees, for virtually any purpose. Anyone may copy, distribute or reuse these articles, as long as the author and original source are properly cited.
Main Article Content
Transition metal oxide supported on alumina catalysts: a comparative study for the hydrogenation of octanal
Abstract
Monometallic (10 wt.%) Co, Ni and Cu nanoparticles supported on alumina catalysts were prepared using an ultrasonic impregnation- cavitation method and characterized using ICP, XRD, physisorption, chemisorption and temperature programmed techniques. The copper catalyst showed higher metal dispersion and greater hydrogen and CO chemisorption capacity when compared to the nickel and cobalt catalysts. Hydrogenation of octanal carried out in a continuous flow high pressure fixed bed reactor showed that the rate of reaction and turnover number of octanol depended on the amount of hydrogen chemisorbed. The copper catalyst showed the lowest activation energy, as well as best catalytic activity. The Cu-Al catalyst which showed higher metal dispersion and low acidity, showed the highest selectivity towards octanol with no C24 acetal formation, when compared to the Ni-Al and Co-Al catalysts.
Keywords: Octanal hydrogenation, octanol, copper, nickel, cobalt
