Article Sidebar
Published:
Oct 7, 2015Keywords:
Article Details
Copyright for articles published in this journal is retained by the journal.
SAJChem applies the Creative Commons Attribution (CC BY) license to manuscripts we publish. This license was developed to facilitate open access – namely, free immediate access to, and unrestricted reuse of, original works of all types. Under this license, authors agree to make articles legally available for reuse, without permission or fees, for virtually any purpose. Anyone may copy, distribute or reuse these articles, as long as the author and original source are properly cited.
Main Article Content
The Use of Dowex-M43 Ion-exchange Resin in the Determination of Pt and Pd in Converter Matte by ICP-OES
Abstract
The method of choice for the separation of platinum group metals (PGMs) from base metals and easily ionizable elements (EIEs) is usually ion-exchange. This paper describes an anion-exchange procedure using Dowex-M43 for the separation of EIEs in geological samples (converter matte) from PGMs and Au.Aqueous commercial standards were used to study the adsorption capacity of the Dowex-M43 resin for both Pd and Pt metals (0–1000 μgmL–1). The concentrations of Pd and Pt were determined using inductively coupled plasma optical emission spectroscopy (ICP-OES). The results from the analysis of solutions prepared from commercial standards after ion-exchange treatment showed quantitative recoveries of both Pt (97%) and Pd (99%) from Dowex-M43 resin using 0.1 mol L–1 thiourea solution. Good agreement was observed between results obtained in this method and those obtained with the use of the conventional acid dissolution method for the determination of Pd and Pt in converter matte.
Keywords: Anion-exchange, converter matte, ICP-OES, platinum group metals
