Extraction, FTIR and GC-MS characterization of palm kernel oil for laundry soap production

Abstract

This study aimed at extracting and characterizing palm kernel oil from oil palm seed for laundry soap production. Palm kernel oil was obtained by Soxhlet extraction with n-hexane. Standard methods were used to determine the physicochemical properties of the kernel oil and laundry soap. Fourier Transform Infrared Spectroscopy (FTIR) and Gas Chromatography-Mass Spectrometry (GC-MS) analyses were used to characterize the oil. Results revealed that the palm kernel seed yielded 45.51±1.10% oil. Relative density, saponification value, acid value, and iodine value of the oil were 0.87±0,034 g/mL, 224.40±3.13 mg KOH/g, 3.25±0.11 mgKOH/g, and 14.72±0.25 gI₂/100g, respectively. FTIR spectrum showed absorption peaks of methylene groups (723, 2855, 2922 cm^–1), carbonyl group (1744 cm^–1), and olefin group (1632 cm^–1) which are characteristics of fatty acids. GC-MS analysis showed oleic acid, trans-13-octadecenoic acid, elaidic acid, petroselinic acid and vaccenic acid. Quality parameters of the white and hard palm kernel oil soap were found to be 9.55±0.43, 5.20±0.48 cm, 9.65±0.97% and 72.50±2.34% for the pH, foam height, moisture content, and total fatty matter, respectively. These findings suggest that FTIR and GC-MS can substantially be used to effectively verify the suitability of a vegetable oil for soap production. Finally, the moderately high oil yield of the kernel seed indicates its potential for large-scale soap production in Nigeria considering the country’s position as the world’s 4th largest producer of palm kernel oil.