The evaluation of the effects of different curing methods on concrete

Abstract

This research explores the impact of various curing methods on the water absorption and compressive strength of concrete. To evaluate these properties, 45 cubes of mix ratio 1:2:4 were tested under different curing methods namely water ponding, sand, polythene sheet coverage, sawdust and water sprinkling. All the cubes were cured at an average laboratory temperature. Water absorption, compressive strength and SEM-EDX tests were conducted on the concrete cubes after curing for 7, 14 and 28 days. The study found that the water absorption and compressive strength values at 7, 14, and 28 curing days ranged from 1.53 to -1.12% and 21.30 to 31.40 N/mm², respectively and varied depending on the curing method used. All the cementitious compositions of the concrete cubes of all the curing methods showed an increase with the increase in curing age and ranged between 0.01 and 81.67, while their SEM images revealed heterogeneous microstructures consisting of aggregates, cement paste, and voids.Sand and sawdust curing produced the highest and lowest compressive strength values, respectively. Based on these findings, sand curing was identified as the most favourablemethod. Further investigation should be carried out.