Article Sidebar
Published:
Aug 1, 2022DOI:
10.4314/njtd.v19i2.9Keywords:
Article Details
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form may be downloaded from the NJTD Website (http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.
Main Article Content
Numerical investigation of thermal performance of a combined heat sink with various microchannel shapes
Abstract
The influence of channel shape on a combined heat sink of three different channel forms is investigated numerically in this work. The channel shapes considered were the trapezoidal, inverse trapezoidal and hexagonal microchannel shapes. The goal of this study was to compare and identify the combined microchannel shape that performed best under conditions of high uniform heat flux. The thermal performance of the combined heat sink was assessed using two criteria: lowest maximum temperature and lowest temperature elevation on the bottom of the combined heat sink where heat is applied. The uniform heat flux applied to the bottom of the combined heat sink was elevated from 100 ?/??2 to1000 ?/??2. For the maximum heat flux of 1000 ?/??2and lowest pressure drop of 10kPa considered, in terms of temperature elevation on the bottom of the heat sink where heat is applied, the trapezoidal combined microchannel heat sink outperformed other channel shapes. When the minimized overall maximum temperature is considered, the hexagonal combined microchannel heat sink was the best combined heat sink.
