Article Sidebar
Article Details
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form may be downloaded from the NJTD Website (http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.
Main Article Content
Evaluation of the Strength Properties of Asphalt Concrete using Natural Fibres as Reinforcing Additives
Abstract
The period of maintenance and rehabilitation of asphalt concrete pavement can be increased by using fibres as reinforcement in a bituminous mix. Shredded Sisal fibre (Agave sisalana) and Sponge gourd (Luffa cylindrical) were used as reinforcements in bituminous mix. The fibres were added to hot mix asphalt in varying proportion of 0.1%, 0.2%, 0.3%, 0.4% and 0.5% by weight. The strength of fibre reinforced asphalt concrete was determined by conducting Marshall stability test. The tensile strength on 40 strands of fibre gave 167.43 N/mm2 and 24.58 N/mm2 for Sisal fibre and sponge gourd fibre respectively. Marshall Stability test results indicated that Sisal fibre gave minimum and maximum values of 4.46 kN and 5.54 kN, respectively, which exceeded the 3.5 kN minimum stability value for wearing course in the Nigerian General Specification for Roads and Bridges. The flow values obtained showed that the flow values are more than the 4 mm minimum value except for 0.1 sisal fibre dosage which has a value of 3.99 mm. The high flow values obtained was an indication of the reinforcing effects of the fibres which made the asphalt concrete stronger and hence have great resistance to plastic deformation.
