Main Article Content
Development of Shunt Active Power Filter for Harmonic Reduction using Synchronous Reference Frame with Space Vector Pulse Width Modulation
Abstract
The work aims at development of Shunt Active Power Filter (SAPF) for harmonic reduction. The current harmonics are being caused by nonlinear characteristic of power electronics based equipments which increase power losses and in turn reduce power quality. Synchronous Reference Frame (SRF) was used as a control strategy and for reference harmonic current generation and Space Vector Pulse Width Modulation (SVPWM) was adopted as switching signal generation. With RL load under balanced input voltage condition, the developed SAPF-SVPWM achieved a reduction of THD of 0.91% as compared to 25.60 before compensation. In addition, the developed SAPF- SVPWM model was compared with SAPF without compensation using RL load under unbalanced voltage and the result shows that the developed SVPWM achieved reduction in THD of 1.74 % as compared to 26.68% after and before compensation. The developed SVPWM model was also compared with SPWM balanced and unbalanced voltage condition. The results show that SVPWM performed better than SPWM. All the results obtained are within IEEE 519 harmonics standard (i.e. THD less than 5%) with nonlinear load under balanced and unbalanced voltage.
Keywords: Shunt active filter, input voltage, harmonics, space vector pulse width modulation, nonlinear load.