Article Sidebar
Published:
Jul 22, 2020DOI:
10.4314/njtd.v17i2.1Keywords:
Article Details
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form may be downloaded from the NJTD Website (http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.
Main Article Content
Application of Moringa Oleifera Seed Extract (Mose) in the Removal of Heavy Metals from Tannery Wastewater
Abstract
The main focus of this research work is to investigate the possibility of applying Moringa oleifera seed extract for the removal of heavy metals from tannery wastewater. Samples were collected from effluent discharge points of the GB tannery, Muhaza tannery and Z-tannery which are located in Challawa Industrial Area, Kano, Nigeria. The samples analyzed for physico-chemical parameters are pH, temperature, hardness, conductivity, turbidity, alkalinity, total suspended solid, total dissolved solid, calcium, magnesium, chloride, nitrates, sulphates and sulphide and heavy metals such as cadmium, chromium, copper, cobbalt, iron, lead, manganese and zinc. The results show that the final levels of heavy metals after the application of Moringa Oliefera seed extracts were within NESREA acceptable limits. The heavy metal removal efficiencies were as follows; 99.29% for cadmium, chromium and iron while 96.03%, 95.56%, 96.84%, 87.41%, 91.35% for copper, cobalt, lead, manganese and zinc, respectively. The cheap, easy and environmentally friendly material called Moringa oleifera could be recommended to tannery companies for effective removal of heavy metals so as to have a safe, non-polluting environment and also prevent endangering the lives of aquatic organisms andHUMANS
Keywords: Moringa Oleifera, tannery, wastewater, heavy metal, wastewater
