Article Sidebar
Published:
Mar 7, 2018DOI:
10.4314/njtd.v15i1.5Keywords:
Article Details
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form may be downloaded from the NJTD Website (http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.
Main Article Content
Optimization of dye removal from textile wastewater using activated carbon from sawdust
Abstract
This study is aimed at developing an adsorbent from sawdust for optimum removal of dye from textile wastewater. The adsorbent was developed, characterised and, the adsorptive capability for the removal of dye was determined by optimizing the process parameters (adsorbent dosage, contact time and agitation speed) using Response Surface Methodology. The physical and chemical characterization of the effluent was carried out before and after the adsorption studies. From the results, a maximum adsorption capacity of 98.5 % was obtained at the optimized conditions of 1.5 g, 90 min and 275 rpm for adsorbent dose, contact time and agitation speed respectively. The ANOVA of the regression model showed that the model is highly significant with R2 of 0.98. Further analysis carried out revealed that, in addition to dye removal, trace metals were also adsorbed in the process. This fact was established when the concentration of copper in the wastewater was found to decrease from 0.09 ppm to 0.03 ppm corresponding to 66.7 % removal at the end of the process.
Keywords: Pollution, Wastewater, Textile, Adsorption, ICP-MS, Optimization, Trace metal
