Article Sidebar
Published:
Feb 10, 2016DOI:
10.4314/njtd.v12i2.5Keywords:
Article Details
In accordance with the Copyright Act of 1976, which became effective January 1, 1978, the following statement signed by each author must accompany the manuscript submitted: "I, the undersigned author, transfer all copyright ownership of the manuscript referenced above to the Nigerian Journal of Technological Development, in the event the work is published. I warrant that the article is original, does not infringe upon any copyright or other proprietary right of any third party, is not under consideration by another journal, and has not been published previously. I have reviewed and approve the submitted version of the manuscript and agree to its publication in the Nigerian Journal of Technological Development." A copyright transfer form may be downloaded from the NJTD Website (http://njtd.com.ng/index.php/njtd). Author(s) will be consulted, whenever possible, regarding republication of material. All authors must have access to the data presented and the authors and sponsor (if applicable) must agree to share original data with the editor if requested.
Main Article Content
Effects of Polyethylene Glycol on the Mechanical Properties of Medium Carbon Low Alloy Steel
Abstract
The effect of polyethylene glycol [H(OCH2CH2)nOH] as quenchant was studied with a view to investigate the mechanical properties and microstructural evaluation of steel. The test samples were subjected to a conventional heat treatment process followed by quenching using prepared polymer solution with a definite proportion. The samples were characterized using a microhardness tester and universal tensile machine for the mechanical properties, metallurgical microscope was used in analyzing their structural re-orientation. From the result, it was observed that the hardness increment of the quenched samples conform to literature review as there was also a rise in the tensile properties. This though, was at the expense of their ductility. The micrographs were found to have justified the reason for the increment recorded in some of the mechanical properties, as it displayed a high proportion of the martensitic phase.
Keywords: Hardness, Impact Energy, Polyethylene Glycol, Quenching
