Article Sidebar
Published:
Aug 2, 2023Keywords:
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Open access articles published in the Journal of Agriculture, Science and Technology are under the terms of the Creative Commons Attribution (CC BY) License which permits use, distribution and reproduction in any medium, provided the original work is properly cited. The CC BY license permits commercial and non-commercial re-use of an open-access article, as long as the author is properly attributed.
Copyright on any research article published in the Journal of Agriculture, Science and Technology is retained by the author(s). The authors grant the Journal of Agriculture, Science and Technology with a license to publish the article and identify itself as the original publisher. Authors also grant any third party the right to use the article freely as long as its original authors, citation details and publisher are identified.
Use of the article in whole or in part in any medium requires proper citation as follows:
Title of Article, Names of the Author, Year of Publication, Journal Title, Volume (Issue) and page. Links to the final article on the JSRE website are encouraged.
The Creative Commons Attribution License does not affect any other rights held by authors or third parties in the article, including without limitation the rights of privacy and publicity. Use of the article must not assert or imply, whether implicitly or explicitly, any connection with, endorsement or sponsorship of such use by the author, publisher or any other party associated with the article.
For any reuse or distribution, users must include the copyright notice and make clear to others that the article is made available under a Creative Commons Attribution license, linking to the relevant Creative Commons web page. Users may impose no restrictions on the use of the article other than those imposed by the Creative Commons Attribution license.
To the fullest extent permitted by applicable law, the article is made available as is and without representation or warranties of any kind whether express, implied, statutory or otherwise and including, without limitation, warranties of title, merchantability, fitness for a particular purpose, non-infringement, absence of defects, accuracy, or the presence or absence of errors.
Main Article Content
Evaluation of crushed slates as a suitable capping material for rapid gravity sand filters
Abstract
In the potable water treatment process, Rapid Gravity Sand Filters (RGSF) are commonly adopted as the last solid-liquid separation stage. Cleaning of the RGSF is done through backwashing. RGSF is widely adopted all over the World due to its ease of operation and high filtration rates. However, these filters suffer from stratification of the sand media, which causes floc removal to occur only at the topmost layer of the filter bed, leaving the remaining depth unutilized. Capping is a technique whereby a thin layer of sand filter media is replaced with a suitable coarse material to overcome the problem of stratification and transform a singlemedia RGSF into a dual-media filter. The objective of this study is to determine the suitability of crushed slates as a capping material. The study evaluated the performance of a crushed expanded slate-capped filter against a conventional single-media RGSF, the effects of its physical and chemical characteristics, and varying the depth of the capping material. Laboratory tests were conducted to assess the physical and chemical characteristics of slates from Maji ya Chumvi (Coast, Kenya). This included specific gravity, acid solubility, water extractable substances, silica content, and friability. A performance comparison was carried out by means of a fabricated model filtration unit set up within an existing community water treatment plant. The model filtration unit was fed with pretreated raw water of varying influent turbidities. Crushed expanded slates met the minimum physical and chemical requirements for use as a capping material for RGSF. The crushed expanded slate-capped RGSF model demonstrated high robustness under high shock turbidity loads (above 150 NTU), which is illustrated by an increased length of filter run of 27% (50–150 NTU) and 45% (150–300 NTU). Increasing the depth of capping material from 25mm to 50mm did not yield any significant improvement or deterioration in the filter run length. At influent turbidities below 150 NTU, the effluent water quality for all three scenarios (uncapped, 25 mm, and 50mm crushed expanded slates capped) is below 5 NTU and therefore meets the Kenyan drinking water standards. Above 150 NTU influent turbidity, the effluent water quality for the uncapped RGSF deteriorates, whereas for the 25mm and 50mm capped RGSF, it remains consistently below 5 NTU. This demonstrates the usefulness of the crushed expanded slates in improving the turbidity removal of RGSF for high (above 150 NTU) turbidity loads. This study recommends a full-scale trial of crushed expanded slates to facilitate a more precise estimation of the overall benefit of full-scale community water filtration systems.
