Article Sidebar
Published:
Aug 2, 2022Keywords:
Article Details
Open access articles published in the Journal of Agriculture, Science and Technology are under the terms of the Creative Commons Attribution (CC BY) License which permits use, distribution and reproduction in any medium, provided the original work is properly cited. The CC BY license permits commercial and non-commercial re-use of an open-access article, as long as the author is properly attributed.
Copyright on any research article published in the Journal of Agriculture, Science and Technology is retained by the author(s). The authors grant the Journal of Agriculture, Science and Technology with a license to publish the article and identify itself as the original publisher. Authors also grant any third party the right to use the article freely as long as its original authors, citation details and publisher are identified.
Use of the article in whole or in part in any medium requires proper citation as follows:
Title of Article, Names of the Author, Year of Publication, Journal Title, Volume (Issue) and page. Links to the final article on the JSRE website are encouraged.
The Creative Commons Attribution License does not affect any other rights held by authors or third parties in the article, including without limitation the rights of privacy and publicity. Use of the article must not assert or imply, whether implicitly or explicitly, any connection with, endorsement or sponsorship of such use by the author, publisher or any other party associated with the article.
For any reuse or distribution, users must include the copyright notice and make clear to others that the article is made available under a Creative Commons Attribution license, linking to the relevant Creative Commons web page. Users may impose no restrictions on the use of the article other than those imposed by the Creative Commons Attribution license.
To the fullest extent permitted by applicable law, the article is made available as is and without representation or warranties of any kind whether express, implied, statutory or otherwise and including, without limitation, warranties of title, merchantability, fitness for a particular purpose, non-infringement, absence of defects, accuracy, or the presence or absence of errors.
Main Article Content
Occupational exposure risk to radiation in open cast artisanal and small-scale gold mining in Western Kenya
Abstract
Artisanal and small-scale gold mining (ASSGM) is practiced at open-cast gold mines in Western Kenya. Mining is still going on in deep mines, with huge tailings littering the workplace for most miners. This mining exercise brings to the surface myriad radioactive materials from the earth’s crust, which pose physical and radiation hazards to miners. The aim of this study was to determine occupational exposure to radiation at artisanal gold mining sites. Four sites were studied for a period of six months. Environmental radiation exposure levels were measured using the Geiger Mueller tube (GMT) model; PHYWE, whereas thermoluminescent dosimeter badges (TLB) 802A were used to record personal radiation exposure levels. d-Orbital Limited Company provided UD-716AGL, used to read the radiation levels from the TLB. Exposure levels were reported in terms of monthly skin, eye, and body exposures. Results revealed an increase in counts per minute with an increase in depth in a range of 19.83 ± 3.87 to 27.83 ± 2.10 and a mean of 23.62 ± 5.17 cpm. Personal effective radiation exposure doses for the skin, eye and body were 0.19 ± 0.01, 0.19 ± 0.01 and 0.18 ± 0.015 for two sites in Western Kenya, whereas those in Nyanza had 0.27 ± 0.01, 0.27 ± 0.01 and 0.25 ± 0.05 mSv on skin, eye and body. The maximum dose threshold limit was estimated at 1.67 mSv per month. There was no significant difference in the radiation exposure of the eye, skin, and body between the sites as indicated by χ2 = 2.0 and p = 0.157 (at p<0.05) with df = 1. The study revealed that workers are exposed to ionising radiation, but the measured levels were within safe limits.
