Article Sidebar
Article Details
Open access articles published in the Journal of Agriculture, Science and Technology are under the terms of the Creative Commons Attribution (CC BY) License which permits use, distribution and reproduction in any medium, provided the original work is properly cited. The CC BY license permits commercial and non-commercial re-use of an open-access article, as long as the author is properly attributed.
Copyright on any research article published in the Journal of Agriculture, Science and Technology is retained by the author(s). The authors grant the Journal of Agriculture, Science and Technology with a license to publish the article and identify itself as the original publisher. Authors also grant any third party the right to use the article freely as long as its original authors, citation details and publisher are identified.
Use of the article in whole or in part in any medium requires proper citation as follows:
Title of Article, Names of the Author, Year of Publication, Journal Title, Volume (Issue) and page. Links to the final article on the JSRE website are encouraged.
The Creative Commons Attribution License does not affect any other rights held by authors or third parties in the article, including without limitation the rights of privacy and publicity. Use of the article must not assert or imply, whether implicitly or explicitly, any connection with, endorsement or sponsorship of such use by the author, publisher or any other party associated with the article.
For any reuse or distribution, users must include the copyright notice and make clear to others that the article is made available under a Creative Commons Attribution license, linking to the relevant Creative Commons web page. Users may impose no restrictions on the use of the article other than those imposed by the Creative Commons Attribution license.
To the fullest extent permitted by applicable law, the article is made available as is and without representation or warranties of any kind whether express, implied, statutory or otherwise and including, without limitation, warranties of title, merchantability, fitness for a particular purpose, non-infringement, absence of defects, accuracy, or the presence or absence of errors.
Main Article Content
Occupational Exposure to Fugitive Gases (Co and H2s) and Altered Oxygen Levels Among Waste Handlers in Selected Dumpsites in Kenya
Abstract
Solid wastes disposal sites provide a livelihood to many waste pickers. Sporadic fires within the dumpsites and waste decomposition lead to the emission of fugitive gases such as carbon monoxide (CO) and Hydrogen Sulphide (H2S). Increased CO and H2S in ambient air also reduce oxygen (O2) gas levels which can cause negative health effects to the dumpsite workers. This study assessed the levels of CO, O2 and H2S in selected dumpsites. The sites assessed were in Thika (Kiambu County), Ngong (Kajiado County), and Kawangware (Nairobi County) while control sites for the three dumpsites were located within a radius of 300 metres from the edge of each dumpsite. Levels of CO, O2 and H2S were determined using a Multi-gas monitor (model GX2012) during working time at the dumpsites and control sites away from the active dumps. Data was entered into SPSS version 20.1 for analysis. The ANOVA and student t-test were done at a 95% confidence interval. The active dumpsite CO gas mean values were 14.5 ±0.42ppm in Thika, 10 ±0.43ppm in Ngong and 14.5 ±0.34ppm in Kawangware, hence were higher compared to control sites (0ppm). The dumpsite H2S gas levels in Thika and Ngong were both 0.5 ±0.1 ppm, while Kawangware levels were 0.25 ±0.1 ppm. These readings were higher compared to control sites (0.0ppm). The mean dumpsite O2 levels were 20.53% ±0.08 hence significantly lower than from the control sites (20.90± 0.10%). The study revealed that workers in the three sites were exposed to fluctuating O2 levels which should not fall below 18% by volume, elevated levels of CO (13.00± 2.60) ppm and H2S (0.042 ±0.14ppm). These were higher compared to the control sites (0±0.1ppm). This calls for an effective dumpsite gas monitoring and control design to prevent increases beyond regulatory levels.
