Article Sidebar
Article Details
Open access articles published in the Journal of Agriculture, Science and Technology are under the terms of the Creative Commons Attribution (CC BY) License which permits use, distribution and reproduction in any medium, provided the original work is properly cited. The CC BY license permits commercial and non-commercial re-use of an open-access article, as long as the author is properly attributed.
Copyright on any research article published in the Journal of Agriculture, Science and Technology is retained by the author(s). The authors grant the Journal of Agriculture, Science and Technology with a license to publish the article and identify itself as the original publisher. Authors also grant any third party the right to use the article freely as long as its original authors, citation details and publisher are identified.
Use of the article in whole or in part in any medium requires proper citation as follows:
Title of Article, Names of the Author, Year of Publication, Journal Title, Volume (Issue) and page. Links to the final article on the JSRE website are encouraged.
The Creative Commons Attribution License does not affect any other rights held by authors or third parties in the article, including without limitation the rights of privacy and publicity. Use of the article must not assert or imply, whether implicitly or explicitly, any connection with, endorsement or sponsorship of such use by the author, publisher or any other party associated with the article.
For any reuse or distribution, users must include the copyright notice and make clear to others that the article is made available under a Creative Commons Attribution license, linking to the relevant Creative Commons web page. Users may impose no restrictions on the use of the article other than those imposed by the Creative Commons Attribution license.
To the fullest extent permitted by applicable law, the article is made available as is and without representation or warranties of any kind whether express, implied, statutory or otherwise and including, without limitation, warranties of title, merchantability, fitness for a particular purpose, non-infringement, absence of defects, accuracy, or the presence or absence of errors.
Main Article Content
Effects of substituting skimmed milk powder with modified starch in yoghurt production
Abstract
Rheological properties of yoghurt are known to be influenced by several factors during processing including the milk composition, additives, the type of culture (ropy or non ropy), heat treatment and mechanical processes it undergoes after fermentation. The objective of this study was to determine the most appropriate levels of modified starch that could be added in the yoghurt without noticeably altering the keeping quality and consumer acceptability of the yoghurt. A stirred type of yoghurt was developed using modified corn starch as a stabiliser to variably replace skimmed milk powder (partially or in totally) while maintaining the same
quality and consumer acceptability on the yoghurt product. Different formulations were made and their quality characteristics studied using the 3% skimmed milk powder sample as the control. The results showed that the modified corn starch addition did not affect the gelation process, texture, fermentation time and the desired pH end point. Two sample formulations were identified as the most comparable to the control in terms of viscosity, taste, mouth]feel and general acceptability. These were the 0.5% modified corn starch alone and 0.5% modified corn starch with 1% skimmed milk powder. These reduced the cost of production per litre by 22% and 13% respectively. The samples were stable for three consecutive weeks in all the desirable yoghurt quality parameters tested including
consumer acceptability. In conclusion, the application of modified starch at the level of 0.4% was found to have the most significant reduction in cost of production while having the least effect on the keeping quality and consumer acceptability of the yoghurt.
Key words: Yoghurt, starch, quality, acceptability, cost
