Article Sidebar
Published:
Feb 14, 2024Keywords:
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal Area believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Main Article Content
Effect of the fluidic injection on the flow of a converging-diverging conical nozzle
Abstract
The flow in an Over-Expanded Nozzle is subjected to shock waves leading to the unsteady separation of the boundary layer. Free detachment may be followed by a restricted detachment. During the expansion regime in propellant nozzles, several physical phenomena are encountered: supersonic jet, jet separation, adverse pressure gradient, shock wave, turbulent boundary layer, highly compressible mixture layer, return flow, large scale turbulence. These very complex phenomena can considerably affect the performance of the nozzle. The numerical investigation was performed by the CFD-FASTRAN search code, using the k-w SST model as the turbulence model. The calculation is performed by solving the Navier-Stokes equations of two-dimensional compressible turbulent flow. It is based on the study of the fluidic vectorization phenomenon of the thrust of a double-injection convergent-divergent supersonic conical nozzle. The study is based on the effect of the ratio of NPR pressures with SPR = 1 on the overall structure of shock waves. The calculation is highlighting the behavior of a flow that has not neglected. In particular, the appearance of the separation zone formed by the fluid jet and the deflection of the main jet cause separation shocks.
