Article Sidebar
Published:
Feb 8, 2024Keywords:
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal Area believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Main Article Content
Generating temperature cycle profiles of different solar photovoltaic module technologies from in-situ conditions for accurate prediction of thermomechanical degradation
Abstract
The IEC61215 TC200 is a rigorous approval thermal cycling test process that assesses the reliability of solar photovoltaic modules and offers a 25-year lifetime guarantee. However, previous research has shown that installed solar photovoltaic modules experience different rates of degradation depending on the location and climate with most research focused on crystalline silicon. In this study, outdoor weathering data obtained from a rig set up in Kumasi, Ghana for the year 2014, is used to generate thermal cycles for 5 different technologies including monocrystalline, polycrystalline, and amorphous silicon, Copper Indium Gallium Selenide (CIGS) and Heterojunction-With-Intrinsic-Thin-Layer (HIT). From the results, the highest yearly average of the maximum and minimum temperatures, and ramp rates of 54.8oC, 26.1oC, and 6.05oC/h respectively are recorded in CIGS. Polycrystalline recorded the least temperatures of 45.2°C and 23.9°C while HIT recorded the least ramp rate of 4.45°C /h. A comparison between the 2014 and the IEC61215 thermal cycles show extremely wide differences which could explain the higher degradation rates and shorter life of installed solar photovoltaic modules. The procedure adopted in this research can be repeated at different locations to obtain technology-specific thermal cycling profiles to evaluate the thermomechanical damage and predict the life of different solar photovoltaic modules.
