Article Sidebar
Published:
Feb 8, 2024Keywords:
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Open Access authors retain the copyrights of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution and reproduction in any medium, provided that the original work is properly cited.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal Area believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Main Article Content
Mechanical speed estimation of a DFIG based on the Unscented Kalman Filter (UKF)
Abstract
This work proposes a new estimation technique for the doubly-fed induction generator (DFIG) variables. Researchers have designed numerous sensorless control strategies for the DFIG used either for mechanical speed, electromagnetic torque, or rotor position estimation. In this paper, an analysis of an Unscented Kalman Filter (UKF) will be presented as an observer for both rotor and stator currents, and mechanical speed, which are key information in DFIG control. The performance of the proposed observer has been validated in a 9 MW wind turbine under MATLAB/Simulink. Based on the results obtained, UKF is safely able to replace mechanically coupled sensors which have many disadvantages such as high cost, maintenance, and cabling requirements.
