Main Article Content
Microbiological and physico-chemical characterisation of well water in the town of Korhogo, Côte d’Ivoire
Abstract
Water is essential to the life of every living organism. The water used by the consumer must be safe for the preservation of his health. The objective of this study was to assess the quality of well water used in households in the city of Korhogo. To do this, water samples were taken from the wells of different households. Parameters such as pH, temperature, electrical conductivity and total dissolved solids were measured at the sampling sites. Nitrates and ammonium were determined by spectrophotometric methods using sodium salicylate and indophenol blue, respectively. The membrane filtration technique has been used for the enumeration of total coliforms, Escherichia coli, fecal enterococci, sulfite-reducing anaerobic bacteria, yeasts and moulds. The agar incorporation method was used for the enumeration of mesophilic aerobic germs. The non-conformity relative to pH was 73%. All wells were contaminated with nitrates and ammonium. Non-compliance rates of 80% and 53% were obtained for nitrates and ammonium respectively. Non-compliance with mesophilic aerobic germs, total coliforms, E. coli and fecal enterococci was 100% for each indicator. No spore of sulphite-reducing clostridia has been identified. Contamination rates of 80% (mould) and 67% (yeast) were recorded. The moulds isolated from the various water samples belong to the genus Aspergillus. The quality of well water in households is not suitable for human consumption. These waters require treatment or household residents must switch to other safe sources of drinking water.