Magnetic coffee residue biosorbent for selective extraction of zinc oxide nanoparticles in water samples

Abstract

ABSTRACT. Quantification of engineered nanomaterials in the environment has attracted researchers’ interest recently because of their increased release to the environment. In this study, a recyclable and easily accessible magnetized coffee residue (MCR) is proposed for magnetic solid-phase extraction (MSPE) of zinc oxide nanoparticles (ZnO-NPs) from water samples. The MCR was synthesized using a simple one-step chemical co-precipitation method from coffee residue and was characterized by state-of-the-art techniques. Various parameters affecting the MSPE efficiency of ZnO-NPs were optimized and 8.5 pH, 75 mg adsorbent, 120 min extraction time, 10 mL sample volume, 4 mL of 0.001 M HCl as an eluting solvent, and 30 min elution time were identified as the optimum conditions. Under these conditions, the method showed excellent linearity (R² = 0.995) and good sensitivity (detection limit, 0.12 mg L^-1, and quantification limit, 0.4 mg L^-1). Intra and inter-day percent standard deviations were 1.4 and 2.2%, respectively, for the analysis of 6 mg L^-1 ZnO-NPs. The practical applicability of the method for the extraction of ZnO-NPs in environmental samples was evaluated, and recovery values in the range of 93.0–98.2% were obtained, confirming its successful performance. Generally, the technique is easy, economical, and eco-friendly that can be considered for the extraction of metal oxide nanoparticles.

KEY WORDS: Zinc oxide nanoparticles, Magnetic coffee residue, Magnetic solid-phase extraction, Flame atomic absorption spectroscopy, Environmental waters

Bull. Chem. Soc. Ethiop. 2023, 37(4), 859-873.                                                        

DOI: https://dx.doi.org/10.4314/bcse.v37i4.5